Nanjing Hyderman Rubber & Plastic Co.,Ltd
Contact US
Address: No.9,Longjing Rd, Gaochun Economic Development Zone, Nanjing City, Jiangsu Province, China 211300
Tel: 86-25-56836319
Fax : 86-25-56836219
Home > News > Content
Improve The Performance Of Rubber Products And Reduce Costs
- Oct 09, 2017 -

First, the basic process of rubber products

With the rapid development of modern industry, especially the chemical industry, a wide range of rubber products, but its production process, but basically the same. To the general solid rubber (raw rubber) as raw material products, its production process mainly include:

Preparation of raw materials → plastic refining → mixing → forming → curing → rest → inspection

Second, the preparation of raw materials for rubber products

The main materials of rubber products are raw rubber, with agents, fiber materials and metal materials. (Cotton, hemp, wool and all kinds of man-made fibers, synthetic fibers) and metal materials (steel wire, copper wire), and the like is used as the base material; the matching agent is the auxiliary material added to improve the performance of the rubber products; Is used as a skeleton material for rubber products to enhance mechanical strength and restrict product variants.

During the preparation of the raw material, the ingredients must be accurately weighed according to the formula. In order to make the raw gum and the compounding agent can be mixed with each other, some materials need to be processed:

Raw rubber to cut rubber, broken into small pieces;

Such as paraffin, stearic acid, rosin, etc. to be crushed;

Powder containing agent containing mechanical impurities or coarse particles need to be removed;

Liquid compounding agent (pine tar, ancient malon) need to heat, melt, evaporate moisture, filter impurities;

Matching agent to be dry, or easy to agglomerate, mixing the old can not be dispersed evenly, when the vulcanization of bubbles, thus affecting product quality;

Third, the rubber products of plastic refining

Raw rubber is flexible, lacks the necessary performance (plasticity) during processing, and therefore is not easy to process. In order to improve its plasticity, it is necessary to plasticize raw rubber; so that the mixing agent is easy to evenly dispersed in the raw rubber; at the same time, in the calendering process also helps to improve the permeability of the compound (infiltration Fiber fabric) and molding fluidity. The long process of biodegradation of raw rubber, the formation of plasticity process is called plastic. There are two kinds of plastic molding and thermoplastic mixing. Mechanical plasticization is not too high temperature, through the plastic mill mechanical squeeze and the role of friction, so that the degradation of long chain rubber molecules become short, from high elastic state into a plastic state. Thermoforming is the burning of raw rubber into the hot compressed air, under the action of heat and oxygen, so that the degradation of long-chain molecules become short, in order to obtain plasticity.

Fourth, the mixing of rubber products

In order to adapt to a variety of different conditions of use, to obtain a variety of different properties, but also to improve the performance of rubber products and reduce costs, must be added in the raw rubber with a different agent. Mixing is the plastic blend of raw rubber and mix agent, placed in the mixing machine, through the mechanical mixing effect, so that with the agent completely and evenly dispersed in the raw rubber in a process. Mixing is the rubber products in the production process of an important process, if the mixing is not uniform, can not give full play to the role of rubber and complex agent, affecting the use of the product performance. The compound obtained after mixing is known as a compound, which is a semi-finished material for the manufacture of various rubber products, commonly known as a compound, which is usually sold as a commodity. The purchaser can use the compound to be directly processed and vulcanized Need for rubber products. Depending on the formulation, the blend has a range of different grades and varieties that offer different options.

Fifth, the molding of rubber products

Molding method in the rubber industry is also a very important molding method, the rubber cut or punch into a simple shape, adding heating mold, in the molding at the same time curing, the product is hot off the mold. Many rubber mold products such as gaskets, shock absorbers (such as aprons, plastic sheet) and so on are produced by this method.